JavaScript seems to be disabled in your browser.
You must have JavaScript enabled in your browser to utilize the functionality of this website.

ESS-B3011A & GT30RA Electrostatic Discharge Simulator | NoiseKen

sku:ESS-B3011_L1611

Availability: In stock

฿0.00

ข้อมูลสินค้า

เครื่องจำลองการคายประจุไฟฟ้าสถิต

Qty:

https://www.ie.co.th/media/catalog/product/cache/1/image/9df78eab33525d08d6e5fb8d27136e95/e/s/ess-b3011_l1611.jpg

EN/IEC 61000-4-2 Ed2 Compliant (B3011A)
ISO 10605 Ed2 Compliant (B3011A) (Note: Optional gun head and CR units are required.)
"Discharge detecting function" to realize the air-discharge confirmation (B3011A)
"Lightest Discharge Gun in the market "to lighten the continuous operation (GT-30RA)
"White LED Irradiator" to facilitate the visualization of the discharging point (GT-30RA)

SPECIFICATIONS

ESD Simulator Main Unit Model : ESS-B3011A

Items		ESS-B3011A specifications
Polarity		Positive or Negative
Output voltage		0.2 to 30.0kV +/-5% (30.5kV maximum) 0.2 to 10kV: 0.05kV step 10.0 to 30.5kV: 0.10kV step
Repetition cycle		0.05 to 99.9s (+/- 10%) /Manual 0.05 to 10.0s: 0.05s step 10.0 to 99.9s: 0.10s step
No. of time of discharge		1 to 999 times /continuous
Discharge mode		Contact discharge/ Air discharge
Trigger mode		Gun trigger / Main unit trigger
Operation panel		Indicator: 5x7 dot matrix LED Operation: Push-buttons (Partially lighting)
Radiation mode select switch		Extra / Normal switching function built-in
Discharge detection		Discharge detection function in air-discharge mode
Pre-checking function		High voltage output checking (by user operation. Not the calibration but just checking)
CR & Gun head checking		CR constant and gun head recognizable (with an indicator to prevent the wrong combination)
IEC level switching function		Contact discharge mode: 2.0, 4.0, 6.0, 8.0 kV step Air discharge mode: 2.0, 4.0, 8.0, 15.0 kV step
Warning lamp		Lights up while the HV circuitry is on. Blinks while discharges are in progress.
Charging capacitor and resistance		150pF+/-10%, 330 ohm +/-10% (built into Discharge Gun GT-30RA)
Main unit charging resistance		10M ohm (53Mohm for combination with Discharge Gun GT-30RA)
Power supply/ Power consumption		100 to 240V AC 50/60 Hz +/-10% 62VA
Included accessories		Instruction manual
Dimensions and weight		(W)270 X (H)263 X (D)200 mm (projection excluded) Approx. 4.6 kg

Discharge Gun Model : GT-30RA

Items		GT-30RA specifications
Output voltage		30.5kV Max
Polarity		Positive or Negative
Repetition cycle		0.05s and over Note) Guaranteed value is 0.1s and over (330pF and under)
Discharge mode		Contact or Air
Charging resistor		Built-in CR unit
Charge/Discharge capacitor & Discharge resistor		Built-in CR unit
High voltage connector		Composite connector of high voltage and signal line (male) （NoiseKen custom)
Operation switch		Discharge trigger
LED irradiator		White LED light built-in for irradiating EUT （Focusing point is the tip)
Included accessories		CR unit (150pf-330 ohm) 06-00073B Conical discharge tip 12-00007A Round discharge tip 12-00008A Instruction manual
Dimensions and weight		(W)83 X (H)217 X (D)229 mm (projection excluded) Approx. 0.8kg (Cable and connector excluded) Approx. 10.8kg (Cable included, connector excluded)

Designs and specifications are subject to change without notice.

There are no products matching the selection.