Back to Top

3169-20 Clamp on Power Logger | เครื่องบันทึกค่ากำลังไฟฟ้า | HIOKI

sku:3169-20

Availability: In stock

฿0.00

ข้อมูลสินค้า

เครื่องวัดและบันทึกพลังงานไฟฟ้า (Power Quality Analyzers | Power Loggers)



  • วัดพลังงานไฟฟ้าและฮาร์มอนิคพร้อมกันได้สูงสุดถึง 4 วงจร (1P2W 4 systems)

  • เหมาะสำหรับงานปรับปรุงการลดการใช้พลังงานในอาคารหรือโรงงาน

  • กระแสใช้งาน 0.5 - 5000 A (ขึ้นอยู่กับอุปกรณ์เสริม), แรงดัน 150 - 600 VAC, เพาเวอร์ 75 W - 900 kW.

  • วัดฮาร์มอนิคได้ถึง 40 th

  • วัดสัญญาณได้ต่อเนื่อง แสดงค่าในรูปแบบ กราฟเชิงเส้น กราฟแท่ง

  • ตรวจจับสัญญาณผิดพลาด ป้องกันการข้อมูลคลาดเคลื่อน

  • บันทึกข้อมูลในรูปแบบ PC card สูงสุดถึง 528 MB.

Power Meter | CLAMP ON POWER HiTESTER 3169-20

Demand Measurement up to 4 Circuits and Simultaneous Harmonics Analysis

       Hioki 3169 เครื่องบันทึกและวิเคราะห์ไฟฟ้าแบบพกพาที่ดีที่สุดในเครื่องวัดไฟฟ้าระดับเดียวกันสามารถวัดค่า Single - Three phase ได้ด้วยความแม่นยำและความเที่ยงตรงสูง โดยการออกแบบมาให้วัดค่าคลื่นไฟฟ้าและความต้องการของไฟฟ้า เพื่อการจัดการพลังงานซึ่งเป็นสิ่งสำคัญ

RS232C  TrueRMS CE

Key Features

  • Simultaneously measure demand and harmonic waveforms that share the same voltage line over 4-circuits
  • Data can be saved onto a PC card
  • High-speed and continuous processing to measure individual waveforms

To measure multiple systems simultaneously

In addition to performing simultaneous measurement for up to four systems (single-phase, 2-wire) with a common voltage, you can set the current range individually for each system. Setting the most suitable current range for both large and small loads allows you to acquire more accurate measurements

Specifications

Measurement line & number of circuits:

Single-phase 2-wires (4 circuits), Single-phase 3-wires (2 circuits), Three-phases 3-wires (2 or 1 circuit), and Three-phases 4-wires (1 circuit)

Note: 50 or 60 Hz, and that share the same voltage line

Measurement items:

Voltage, Current, Active/ reactive/ apparent power, Active/ reactive power integration, Power factor, Frequency, Harmonic waveform value (up to 40th order)

Measurement range:

[Voltage] 150.00 V to 600.00 V AC, 3 ranges, [Current] 500.00 mA to 5.0000 kA AC (depends on current sensor in use), [Power] 75.000 W to 900.00 kW (depends on combination of voltage, current range, and measurement line)

Basic accuracy:

AC Voltage: ±0.2 % rdg. ±0.1 % f.s.

AC Current: ±0.2 % rdg. ±0.1 % f.s. + current sensor accuracy

Active power: ±0.2 % rdg. ±0.1 % f.s. + current sensor accuracy (at power factor = 1)
Clamp on sensor 9661: ±0.3 % rdg. ±0.01 % f.s. (different from each sensor models)

Measurement method:

Digital sampling, PLL synchronization or 50/60 Hz fixed clock

Display refresh rate:

2 times /sec (except when a PC card accessing, or RS-232C communications)

Data save interval:

Standard interval: 1 sec to 30 sec, 1 minute to 60 minutes, 13 selects

Fast interval: A single waveform, or 0.1, 0.2, or 0.5 sec (at instant value only)

Frequency characteristics:

Fundamental waveforms up to the 50th order ±3% f.s. + measurement accuracy (of a 45 to 66 Hz fundamental waveform)

Other functions:

Error connect check, language selection, display hold, setting backup, power shut off management, key lock, [3169-21 only] D/A output 4 channels, (±5 V DC f.s.)

Power supply

100 to 240 V AC, 50/60 Hz, 30 VA max.

Dimensions and mass

210 mm (8.27 in)W × 160 mm (6.30 in)H × 60 mm (2.36 in)D, 1.2 kg (42.3 oz)

Accessories

Voltage cord L9438-53 ×1 (Black/ Red/ Yellow/ Blue, 3 m (9.84 ft) length, Alligator clip ×4), Power cord ×1, Instruction manual ×1, Quick start manual ×1, CD-R ×1 (RS-232C interface operating manual) ×1, Input cord label ×1, Connection cable 9441 ×1 (for the 3169-21 only)

Downloads

3169

Name
Model
แบรนด์สินค้า
Short Description

There are no products matching the selection.