Back to Top

DT4252 Digital Multimeter | ดิจิตอลมัลติมิเตอร์ | HIOKI

sku:DT4252

Availability: In stock

฿0.00

ข้อมูลสินค้า

ดิจิตอลมัลติมิเตอร์

  • มัลติมิเตอร์รุ่นมาตรฐาน คำนวณค่าแบบTrue RMSฟังก์ชั่นการใช้งานครบครัน

  • มีฟังก์ชั่นโลพาสฟิลเตอร์ สำหรับตัดสัญญาณรบกวน100-500 Hz

  • วัดแรงดันAC-DCสูงสุด1000โวลต์ มีไฟเตือนที่หน้าจอเมื่อแรงดันเกิน1000โวลต์

  • วัดกระแสAC-DCสูงสุด10แอมป์

  • วัดค่าความต้านทาน ค่าความต่อเนื่อง(เช็คสายไฟขาดใน)คาปาซิเตอร์ ไดโอด และความถี่

  • มีบาร์กราฟ ไฟแบ็คไลท์ที่หน้าจอ และสามารถทนต่อการกระแทกที่ความสูงจากพื้นคอนกรีต1เมตร

  • เชื่อมต่อกับคอมพิวเตอร์เพื่อดูค่าและบันทึกค่าที่วัดได้(อุปกรณ์ซื้อเพิ่มเติม)

DIGITAL MULTIMETER DT4252

Standard DMM that Delivers Top Safety and Reliability - General Purpose Testers with Rich Measurement Functions

The Hioki DT4200 Digital Multimeter Series consist of a complete lineup of 9 models ranging from professional to industrial to pocket meters, delivering a super fast response rate and safety features that take electrical testing to a higher level. The DT4252 is a digital multimeter designed specifically for general purpose testing, with ±0.3% DC V accuracy, direct current input and wide 40 Hz to 1kHz bandwidth.

CAT IV 600 V, CAT III 1000 V

Key Features

• ±0.3% DC V basic accuracy, wide 40 Hz to 1 kHz AC V frequency characteristics

• Measure up to 10A with direct input

• Dual display lets you check voltage and frequency simultaneously

• Low-pass filter cuts high harmonics (when measuring inverter fundamental waveforms)

• USB communications function supports PC measurements (optional)

extensive measurement capabilities

A digital multimeter with extensive measurement capabilities
The DT4252, which is part of Hioki’s DT4250 series of standard digital multimeters, packs a
broad range of measurement capability into a single package.
・ DC current 6.000A / 10.00A
・ AC current 6.000A / 10.00A

low-pass filter function

Measure output voltage on the secondary sides of inverters by eliminating harmonic components
Accurately measure the fundamental wave alone by eliminating harmonic components with the
DMM’s low-pass filter function.

Measurement data can be downloaded

Measurement data can be downloaded to, reviewed on, and saved to a computer.
If you connect the DT4252 to a computer with the optional Communication Package DT4900-01,
you can graph data stored in the instrument’s internal memory and display measurement results in
real time on the computer. In addition, displayed measured values can be saved (in text format).

*The computer and multimeter are electrically isolated by means of optical communications so that data
can be sent with peace of mind.

True RMS measurement

True RMS measurement for accurate measurement of even distorted current waveforms
Digital multimeters implement two types of measurement: mean-value measurement and true RMS
measurement. The two methods yield significantly different measurement results for current waveforms,
which are often distorted. For accurate measurement, it is necessary to use an instrument with true RMS
capability.

ensure high quality

Designed and manufactured in Japan to ensure high quality and guaranteed with a 3-year warranty 
All development, design, and manufacturing processes for almost all Hioki digital multimeters are
carried out at our Head Office in Nagano Prefecture. Some of the industry’s most advanced technological
capabilities enable us to deliver products of the highest possible quality.

CAT IV 600 V, CAT III 1000 V

Safe measurement requires use of an instrument that suits the measurement location.
To ensure operators’ ability to use measuring instruments safely, IEC 61010 classifies the locations
in which instruments are used into a series of safety-based measurement categories (ranging from
CAT II to CAT IV). Using an instrument that does not satisfy the required safety level can lead to an
electrical accident

Specifications

DC Voltage range 600.0 mV to 1000 V, 5 ranges
Basic accuracy: ±0.3 % rdg. ±5 dgt.
AC Voltage range 6.000 V to 1000 V, 4 ranges, Frequency characteristics: 40 Hz - 1 kHz
Basic accuracy 40 - 500 Hz : ±0.9 % rdg. ±3 dgt. (True RMS, crest factor 3)
AUTO AC/DCV N/A
Resistance range 600.0 Ω to 60.00 MΩ, 6 ranges, Basic accuracy: ±0.7 % rdg. ±5 dgt.
DC Current range 6.000 A / 10.00 A, 2 ranges, Basic accuracy: ±0.9 % rdg. ±5 dgt.
AC Current range 6.000 A / 10.00 A, 2 ranges,
Basic accuracy 40 - 500 Hz : ±1.4 % rdg. ±3 dgt.
(True RMS, crest factor 3, 40 Hz to 1 kHz)
AC Current range (use with Clamp on probes) N/A
Voltage detection (50/60 Hz) N/A
Capacitance range 1.000 μF to 10.00 mF, 5 ranges, Basic accuracy: ±1.9 % rdg. ±5 dgt.
Frequency range AC V, AC A measurement: 99.99 Hz (5 Hz or more) to 9.999 kHz, 3 ranges, 99.99 kHz (only for AC V)
Basic accuracy: ±0.1 % rdg. ±1 dgt.
Continuity check Continuity threshold [ON]: 25 Ω or less (Indicate buzzer sound, red LED), [OFF]: 245 Ω or more
Response time: 0.5 ms or more
Diode test Open terminal voltage: 5.0 V or less, Testing current 0.5 mA or less,
Threshold of forward voltage: 0.15 V to 1.5 V
Other functions Filter function, Display value hold, Auto hold, Max/Min/Average value display, Relative display, Auto-power save, USB communication (option)
Display Main and Sub displays: 4-digits LCD, max. 6000 digits, bar graph
Display refresh rates 5 times/s (Capacitance measurement: 0.05 to 5 times/s, depending on measured value, Frequency: 1 to 2 time/s, Temperature: 1 time/s )
Power supply LR03 alkaline batteries ×4, Continuous use: 130 hours (back light OFF)
Dimensions and mass 84 mm (3.31 in)W × 174 mm (6.85 in)H× 52 mm (2.05 in)D, 390 g (13.8 oz) (with batteries and holster)
Accessories Test lead L9207-10 ×1, Holster ×1, Instruction manual ×1, LR03 alkaline battery ×4

Downloads

Catalog: DIGITAL MULTIMETER DT4200 Series doawload PDF

Instruction Manual doawload PDF


add line mi
เพิ่มเพื่อน
Name
Model
แบรนด์สินค้า
Short Description

There are no products matching the selection.